Point provides and easy way of simply sending your drone to a specific location. 

1. Turn on your controller followed by your drone. Be sure your controller is in F Mode

 

 

 

 

 

 

2. Plug in your iOS device to your controller via a Lightning to USB cable.

 

 

 

 

 

 

3. Once connected, you will see your drone's health metrics across the top of your screen.  Tap the Point icon and move and zoom the map to center your desired flight location.  You will see the drone location represented by the Airnest logo.

 

 

 

 

4. When you are ready just press and hold your finger of the location you would like to to fly too. When you do a pin will drop on that location, you will be asked to choose an altitude. When you click "FLY" the drone will automatically take off, upload the flight plan, and start to fly to that location. 

 

 

 

5. The drone will move to the altitude set. If the drone is lower than the set altitude the drone will first go straight up and then fly to the way point.  If the drone is higher than the set altitude it will fly straight to the way point and lose altitude gradually as it goes (watch for obstacles). 

 

 

 

6. You can now switch to the camera view by simply touching it. At this point you can use the remote to fly manually and adjust the camera as desired to take images or video. 

 

 

 

 

 

7. You can also use our Motion Camera Controls at this point. This feature allows you to simply pan and tilt your iOS device in order to pan and tilt the drone camera in real time while you watch a live feed. This feature makes panning and tilting video shots very easy and smooth, your tracking shots will never be better.

 

Please be aware that you are turning full control of the drone over to the app, the app will attempt to keep the drone in the same GPS location but does not utilize the vision cameras on the bottom of your drone, when the drone course corrects it will be much more aggressive but in testing has performed very well. If you have a problem you can exit this mode by switch to P Mode on your controller to regain full manual control. Additionally this mode will stop if you click the map or go back to the nest view. 

 

 

 

 

Please be aware that you are turning full control of the drone over to the app, the app will attempt to keep the drone in the same GPS location but does not utilize the vision cameras on the bottom of your drone, when the drone course corrects it will be much more aggressive but in testing has performed very well. If you have a problem you can exit this mode by switch to P Mode on your controller to regain full manual control. Additionally this mode will stop if you click the map or go back to the nest view.